![]() |
|||||||
|
|||||||
![]() |
MDD250-16N1资料 | |
![]() |
MDD250-16N1 PDF Download |
File Size : 116 KB
Manufacturer:WESTCODE Description: The melting temperature of solder is higher than the rated temperature of the device. When the entire device is heated to a high temperature, failure to complete soldering within a short time could result in device failure. There- fore, the following items should always be observed in order to minimize the thermal stress to which the devices are subjected. Always preheat the device. The delta temperature between the preheat and soldering should be 100C or less.* When preheating and soldering, the temperature of the leads and the case must not exceed the maximum temperature ratings as shown on the data sheet. When using infrared heating with the reflow soldering method, the difference shall be a maximum of 10C. The soldering temperature and time shall not exceed 260C for more than 10 seconds. When shifting from preheating to soldering, the maximum temperature gradient shall be 5C or less. After soldering has been completed, the device should be allowed to cool naturally for at least three minutes. Gradual cooling should be used as the use of forced cooling will increase the temperature gradient and result in latent failure due to mechanical stress. Mechanical stress or shock should not be applied during cooling. |
相关型号 | |
◆ R3968FD28N | |
◆ R3968FD28R | |
◆ R3968FD28T | |
◆ R2619ZC25J | |
◆ R3370ZC12D | |
◆ R600CH25 | |
◆ N0734YS160 | |
◆ N540SH18 | |
◆ N540CH18 | |
◆ R355CH12 |
1PCS | 100PCS | 1K | 10K | ||
价 格 | |||||
型 号:MDD250-16N1 厂 家:WESTCODE 封 装:平装 批 号:new 数 量:1000 说 明: 原装正品、长期现货、三包承若 所报价格均含税含运费价格!如果不明白欢迎来电咨询,谢谢! 特征 芯片与底板电气绝缘
交直流电机控制 标准二极管模块 应用: |
|||||
运 费:10.00元(快递) 所在地:昆山市 新旧程度:全新 |
|||||
联系人:林志胜 |
电 话:4006333495,0512-50111678 |
手 机:18602223500,18962647678 |
QQ:5178133,4006333495 |
MSN: |
传 真:0512-82092268(自动),50111789(手动) |
EMail:qiwodz@vip.qq.com |
公司地址: 江苏省昆山市开发区前进东路233号 |
江浙沪地区:首重1KG 5.00 元 续重1KG 1.00元 其他地区:首重 1KG 10.00元 续重1KG 5.00元 如需顺丰快递请在订购前说明,谢谢! |